Payment & Shipping Terms:
|Material:||Steel ,stainles Steel ,copper ,aluminium ,nickle , Gold , Silver ,titaninum||Power:||200w/300w/400w|
|Certificate:||CE FDA||Warranty:||One Year|
|Laser Type:||YAG Laser||Welding Thickness:||2mm|
laser mould welding machine,
laser spot welding machine
300W 400W Mould Laser Welding Machine YAG Type For Welding Mold Watch Jewelry Metal Procesing Gold Repaire Industry
Product Introduction :
Laser welding a high efficient precision welding method which is in the use of high energy density laser beam as a heat source . Laser welding is one of the important aspects of laser processing technology. Laser radiates and heats the workpiece surface, The surface heat diffuses to the inside through heat conduction, Then the laser makes the workpiece melting and form the specific welding pool by controlling the laser pulse width, energy, peak power and repetition frequency. Due to its unique advantages, it has been successfully applied to the precise welding for micro parts and small parts.
Laser welding is fusing welding technology, laser welder puts laser beam as the energy source, and make it impact on the weldment joints to realize welding .
Machine advanatage :
1. The diameter of the laser welding point is adjustable, and the laser welding has high precision and high accuracy.
2. Choose 1064nm wavelength laser, harmless to the human body.
3. Within the heat range is small, the workpiece will not be deformed, there will be no pores.
4. Make up for the shortcomings of traditional argon arc welding, cold welding in the repair of the fine surface of the welding, oxidation efficiency is low, the work does not change color.
5. The machine can welding narrow place, deep cavity repair welding, will not hurt the surrounding wall. It will not deform the mold product or sink around the weld pool.
6. When welding fine corners, it will not burn edges.
7. Special argon gas protection, repair welding site and substrate will not burn oxidation.
8. Joystick control, work can be any arbitrary curve to move.
9. Microscope observation operation, small parts at a glance.
10. The machine support many wire, suitable for all kinds of imported mold material, after welding can be polished, etched.
|Three axis moving distance||X=220mm,Y=150mm(X,Y move by manual ,Z axis electric controlled)|
|Machine electricity||220V±10%/50/60Hz or 380V±10%/50/60Hz|
|Laser type||Nd: YAG|
|Spot adjusting range||0.1～0.3mm|
|Max laser power||300W|
|Laser output focal length||80mm/100mm/120mm(Optional)|
|Cooling system||Water cooling|
|Observation system||Microscope (Rotary 360º)|
|Protective gas||One path(Argon)|
|Welding wire diameter||0.1mm～0.8mm|
Contact Person: Emily Hwang