Payment & Shipping Terms:
|CNC Or Not:||YES||Cooling Mode:||Air Cooling|
|Laser Wavelength:||355nm||Repetition Rate:||50KHz|
|Max.Marking Speed:||7000mm/S||Applicable Material:||Acrylic,Crytal,Glass,Leather,MDF,Stone Etc.|
|Warranty:||1 Year||Laser Beam:||M2:1.5|
uv laser engraving machine,
uv laser marking systems
UV Laser Marking Machine for Plastic, Ceramic,ABS,Glass,Metal
1) Huahai UV series laser marking machine adopt imported high-quality USA optowave laser source( which is feed backed most stable on market)high efficient photoelectric conversion , output wavelength is 355nm, widely used in high-end ultra-fine laser processing market;
2) 355nm UV laser beam spot is extremely small, the material can be reduced to a large extent the mechanical deformation and processing small heat-affected; so it is mainly used on ultra-fine marking, engraving particularly suitable for food, pharmaceutical packaging material marking and coding porous, high-speed division of the glass material and silicon wafers cut complex graphics applications.
3) UV laser marker also belongs to laser marking series, while it is the newest laser processing technology; due to the traditional laser marking machine (Fiber and Co2)uses a laser thermal processing technology, in terms of fineness obtained improvement restrictive development, however, UV laser marking machine is a cold processing technology, is a big leap in laser technology.
Mainly based on its unique low-power laser beam. It is especially suitable for the high-end market of ultra-fine processing. The surfaces of bottles for cosmetics, pharmaceuticals, food and other high-molecular materials are marked with fine effects and clear and firm markings. Better than ink coding and no pollution; flexible pcb board marking, dicing; silicon wafer micro hole, blind hole processing; LCD liquid crystal glass two-dimensional code marking, glass surface punching, metal surface coating marking, Plastic buttons, electronic components, gifts, communications equipment, building materials, and so on.
1. Focused UV light spot size is small , heat-affected area during processing is mimimum,So it is used in ultra-fine and special material’s marking.
2. Since UV laser did not produce any thermal effects and burning issues, the result of the marking is precise , smooth and steep.
3. A lot of material will absorb UV light at 355nm except Copper, so UV laser are suitable for processing more types of material.
|Laser output power||≥3W|
|frequency of laser||0-100kHz|
|Standard engraving range||110mm×110mm|
|Minimal linear Width||≤0.01mm|
|Cooling system||Air cooling|
|UV Laser source||
3W China RFH laser or
USA imported advanced OptoWave
|Galvo||Top brand made in China|
|Control card and software||EZCAD laser mark|
|Applied material||Rubber, plastic, glass, leather, crystal, metal etc.|
1> How can i install and operate laser marking machine by myself?
Re: When you get the laser marking machine, just need to connect with power cord, then machine can start work. Because the marking software is installed in computer, engineer have set the parameters well before delivery. Also, the complete English user manual and operation video will be sent to you. 98% customers can easily use the machine.
2> How to get technical support after purchasing the laser marking machine?
Re: You can contact us on Skype, WhatsApp and email at any time. Our professional engineer will solve your problem perfectly. If you need any remote assistant support, we will support you with Teamviewer software.
3> Will the laser marking machine come with protective goggle?
Re: Yes, we will provide it with the machine together free of charge.
4> Is there any consumables for the laser marking machine ?
Re: There is no consumables, and maintenance-free. Laser source lifetime up to 100000+ hours.
5>What is the warranty of the machine?
Re: The warranty is 1 year, but permanent service.
Contact Person: huahai