Product Details:
Payment & Shipping Terms:
|
Laser Power: | 50W | Laser Source: | Raycus,JPT Or IPG |
---|---|---|---|
Clean Way: | Laser , No Touch | Consumbles: | Only Electricity |
Material: | Metal,rubber,Stone | Warranty: | 2 Years |
High Light: | laser cleaning equipment,laser rust removal equipment |
50w Rust Removal Laser Cleaning Machine For Metal Post-weld Treatment
Introduction:
The new design of backpack laser cleaning machine of Raycus laser which is light weight, easy operation, high efficiency cleaning, non-contact and pollution-free.
It is used for cast iron and carbon steel plates rust removal ;oil cleaning of stainless steel,mold gears and aluminum plate;stainless steel paint cleaning of oxide surface and does not harm the base metal.
Advantage:
1. Portable Design: Compact, wearable, ergonomic, easy to use;
2. Efficient Cleaning: High-efficiency cleaning, saving time;
3. Non-contact Type: Laser cleaning without grinding and non-contact;
4. No Pollution: It is easy to solve the environmental pollution problems caused by laser without using any chemicals and cleaning liquids;
5. Strong Scalability: Interchangeable field lens, change the depth of focus, laser cleaning format is wider.
Applications:
Oxide Removal, Mold Cleaning, Surface Preparation,Coatings Removal, Weld pre-treatment, Gluing pre-treatment
Removal of Oil and Grease, Paint Removal,Surface Cleaning,Stain Removal, Surface Roughening,Tool Cleaning
Historic Restoration, Selective Paint Removal,Precise Cleaning
Cleaning Parameters:
Base Material |
Surface |
Available Depth of Focus |
Standard Cleaning Effectiveness |
Faster Cleaning Effectiveness |
Effect |
Cast Iron | severe rust ( thickness :0.08mm ) | 8 mm | 2000 mm²/s | 3000 mm²/s | clean surface,no harmful for the base material |
Carbon Steel Plate |
moderate rust ( thickness :0.05mm ) |
8 mm | 1800 mm²/s | 2400 mm²/s | clean surface,no harmful for the base material |
Stainless Steel | surface oil stain,little rust | 8 mm | 2000 mm²/s | 3000 mm²/s | clean surface,no harmful for the base material |
Mold Steel Gear | moderate oil stain,iron filings attached | 8 mm | 1500 mm²/s | 2300 mm²/s | clean surface,no harmful for the base material |
Aluminum Plate | oxide / surface stain | 8 mm | 1500 mm²/s | 2000 mm²/s | clean surface,no harmful for the base material |
Parameters:
Model | HB-HC50 |
Laser source | Fiber laser |
Laser Power | 50W |
Laser Wavelength | 1064nm |
Pulse frequency | 10-500 kHZ |
Cooling | Air cooling |
Scanner width | 0-50mm |
Optional | Manual |
Temperature | 5-40 degrees |
Samples:
Contact Person: huahai