Factory Manufacture High Quality Laser Marking Machine Online Laser Marking Machine Laser Marking Engraving Machine
Fiber laser marking machine is the use of laser beam on a variety of different material surface permanent marks. The marking effect is through the evaporation of the surface material to reveal the deep material, or through the light energy to cause chemical and physical changes in the surface material to "carve" the trace, or through the light energy to burn part of the material, to show the desired etching pattern, text, bar code and other types of graphics. The so-called fiber laser marking machine refers to the use of the marking machine is a fiber laser, fiber laser has a small size (no water cooling device, the use of air cooling), good beam quality (basic mode), maintenance free and other characteristics.
1. Servo XY movement platform, industrial PC control, modular flexible programming design.
2. Standard green laser (other lasers are also optional), the minimum can be engraved 1.6mmx1.6mm up to 16 characters of the two-dimensional code.
3. Coaxial CCD technology, precise positioning, and reading, recognition of two-dimensional code level (adapted to AIM DPM, AS9132 and other standards).
4. Three-color light source lighting: color can be three-color switch, easy to read the carved signs of different color boards.
5. The transmission belt is 900±30mm from the ground, which can be directly connected to SMT. You can choose the direction of material movement.
6. Standard SMEMA interface and network communication function, which can communicate with upper and downstream devices and servers;
7. Dust filter device, effectively remove the dust produced during labeling to ensure clean and healthy.
8. Active anti-stay, the software automatically detects and prevents wrong hitting and missing hitting; The main door is equipped with a safety switch lock, controlled by software,
9. In the process of engraving, each door is not opened by a legal person to prevent bad products;
10. The inlet and outlet is equipped with automatic occlusion door to prevent strong light damage to human eyes during laser engraving.
||Red Light or Cold light(Optional)
|Circuit Board Size
||Minimum 50mm*50mm, Maximum 400mm*300mm (Customizable)
|Repeated Positioning Accuracy
|Minimum Line Width
|Board Entry Mode
||left in right out, right in left out (optional)
||X-Y linear module
||Paraxial CCD camera
|External Auxiliary Device
||Negative pressure adsorption and dust extraction system
|Power Protection (Optional)
||The UPS can run without power for 10 minutes
||220V, 50Hz, or 2KW
||5-35 degrees, humidity less than 50%
||1050mm x 1150mm x 1700mm