China Online Laser Marking Machine Laser Marking Machine Cost Fiber Laser Marking Machine Flying Laser Marking Machine
Fiber laser marking machine is the use of laser beam on a variety of different material surface permanent marks. The marking effect is through the evaporation of the surface material to reveal the deep material, or through the light energy to cause chemical and physical changes in the surface material to "carve" the trace, or through the light energy to burn part of the material, to show the desired etching pattern, text, bar code and other types of graphics.
Fiber laser marking machine main components: Fiber laser marking machine is mainly composed of fiber laser, high-speed scanning galvanometer, marking software, industrial control computer and electric control cabinet components. The fiber laser is the main core component.
1. Servo XY movement platform, industrial PC control, modular flexible programming design.
2. Standard green laser (other lasers are also optional), the minimum can be engraved 1.6mmx1.6mm up to 16 characters of the two-dimensional code.
3. Coaxial CCD technology, precise positioning, and reading, recognition of two-dimensional code level (adapted to AIM DPM, AS9132 and other standards).
4. Three-color light source lighting: color can be three-color switch, easy to read the carved signs of different color boards.
5. The transmission belt is 900±30mm from the ground, which can be directly connected to SMT. You can choose the direction of material movement.
6. Standard SMEMA interface and network communication function, which can communicate with upper and downstream devices and servers;
7. Dust filter device, effectively remove the dust produced during labeling to ensure clean and healthy.
||Red Light or Cold light(Optional)
|Circuit Board Size
||Minimum 50mm*50mm, Maximum 400mm*300mm (Customizable)
|Circuit Board Thickness
|Repeated Positioning Accuracy
|Minimum Line Width
||Code128, CODE39, EAN-8, UPC-A Bar codes, DataMatrix, QR codes
||X-Y linear module
|External Auxiliary Device
||Negative pressure adsorption and dust extraction system
|Power Protection (Optional)
||The UPS can run without power for 10 minutes
||220V, 50Hz, or 2KW
||5-35 degrees, humidity less than 50%
||1050mm x 1150mm x 1700mm